
6 rue Dewoitine
78140 Vélizy-Villacoublay
France

Parc de Sophia Antipolis
06560 Valbonne
France
A consistent GPS signal is vital to successful Field Tests. Malden’s Time Sync Management techniques minimise the effects of any GPS signal loss by ensuring that DSLA units maintain sufficient time sync accuracy to continue running tests after the GPS signal is lost. Time Sync Management maintains the internal clock to within a few milliseconds of GPS time for up to four hours without a GPS a signal.
This is achieved without the additional bulk and weight of a separate high-stability clock and the additional battery packs to power it.
Field Test is so-called because testing is carried out ‘in the field’. The MultiDSLA system must operate in locations where mobile devices are used: in cars, trains, shopping malls, office buildings and sports arenas. MultiDSLA can be used to perform two types of Field Test:
GPS is used in Field Test applications to add location data and for synchronisation. The use of GPS to provide location data as part of the measurement set is desirable, as it enables testers to map results and to visualise ‘problem’ areas. The Full Field Test configuration also relies on close time synchronisation of the vehicle and server systems to obtain consistent results. Previously this could be achieved only by ensuring continuous GPS availability during testing, as any loss of the GPS signal would jeopardise the integrity of the results.
Short-term GPS signal loss may occur in tunnels or wooded areas, for example, and in indoor locations a GPS signal may not be available at all. Digital Speech Level Analyser (DSLA) firmware now includes Time Sync Management which enables the MultiDSLA test system to operate without GPS for extended periods.
Time Sync Management is just one of a range of new features Malden is adding to MultiDSLA to make it a comprehensive, simple-to-use Field Test solution. Other features include:
Contact Opale Systems or your distributor for more information.